✉⌃
Fuel Tanker Trucks

Dongfeng Dolika D7 4×2 Fuel Tanker Truck with 9,900 L Tank and Refueling Pump

A fuel tanker on a Dongfeng Dolika D7 4×2 chassis with a 9.9 m³ cylindrical tank and a pump that both draws in and dispenses fuel, moving diesel, gasoline and engine oil to construction sites and remote projects and refueling equipment and fleets. Unit specifications and dangerous-goods requirements are confirmed with each order before commercial offer.

Fuel Tanker Trucks

Dongfeng Dolika D7 4×2 Fuel Tanker Truck with 9,900 L Tank and Refueling Pump

Fuel tanker on a Dongfeng Dolika D7 4×2 chassis with a 9,900 L (9.9 m³) Q235 steel tank and an arc gear refueling pump, for transporting and dispensing diesel, gasoline and engine oil at project sites and fleets. Final specifications and dangerous-goods requirements to be confirmed per order.

Fuel tank capacity
9.9 m³ (9,900 L) fuel tank
Drive
4×2
Fuel
Diesel
Enquire about this vehicle

Core capabilities

9,900 L tank

9,900 L (9.9 m³)

Moves about 9.9 m³ of fuel per trip; the mass actually carried is limited by the listed payload (6,605–6,670 kg), not by volume alone.

Product density determines load mass; full-volume filling with dense products can approach the 11,950 kg GVW limit.

Refueling pump

Arc gear oil pump (pumping in and out)

Draws fuel from a fixed source and dispenses directly to equipment and machinery without additional gear.

Pump flow rate (L/min) is not listed and must be confirmed per configuration.

Bottom loading and vapor recovery

Complete bottom loading system incl. vapor recovery valve and adapter, overfill prevention probe

Supports safe bottom loading with reduced vapor emission and overfill prevention, as required by many terminal facilities.

Compatibility of destination facilities with this system is reviewed per project.

Safety equipment

ABS, Euro-standard manhole, emergency valve, two fire extinguishers

Baseline equipment for handling flammable cargo in responsible operation.

Final unit compliance with dangerous-goods rules of the destination country is pending and not published.

Applications

Fuel supply to construction sites and projects; refueling of equipment, machinery and fleets; feeding small stations and generators; company and farm fleet service.

Operating notes

Fuel transport is subject to dangerous-goods rules of the destination country; compliance status is pending. Do not fill the tank to full volume if load mass would exceed the legal limit. Overall width is conflicting in the source (2,400 vs 2,250 mm) and no single value is published. Confirm final unit specifications and registration limits before ordering.

Information for a quotation

  • Country of registration and place of use
  • Product to be carried (diesel/gasoline/engine oil)
  • Required number of tank compartments
  • Required pump flow rate and loading equipment (bottom/top)
  • Required emission standard (Euro 2–6)
  • Drive side per destination country
  • Destination port and quantity

This unit carries a 9,900 L (9.9 m³) cylindrical Q235 steel tank with 4–6 mm wall thickness (customizable), an arc gear oil pump capable of pumping in and out, and a single-compartment tank with multi-compartment division as a listed option. Equipment per the source includes a complete bottom loading system (bottom loading/unloading valve, vapor recovery valve and adapter, pneumatic switch set, overfill prevention probe and socket), a European-standard manhole cover, an emergency valve, a toolbox, two hoses, two fire extinguishers and ABS.Listed payload is 6,605–6,670 kg within a listed GVW of 11,950 kg. Filling the tank completely with higher-density products can approach the GVW limit, so legal payload and dangerous-goods rules of the destination country must be reviewed before ordering.

Frequently asked questions

What is the tank capacity and key specifications?

Per the source listing: a 9,900 L (9.9 m³) Q235 steel tank with 4–6 mm wall thickness, single compartment with division optional, on a Dongfeng Dolika D7 4×2 chassis with a listed GVW of 11,950 kg. These are preliminary figures to be confirmed per order.

What fuel types can it carry?

Per the source: diesel, gasoline and engine oil. Tank and equipment compatibility with a specific product is set with each order.

What safety and loading equipment is included?

Equipment listed in the source: complete bottom loading system with vapor recovery and overfill prevention probe, European-standard manhole, emergency valve, two fire extinguishers and ABS.

Can the tank be divided into multiple compartments?

Yes, per the listed options; the standard tank is single-compartment and division is set with the order.

How do I get a quotation?

Send the RFQ requirements listed on this page — country of use, fuel type, compartment count, flow rate, emission standard, drive side, and destination port and quantity. No prices or guaranteed delivery dates are published before they are confirmed for each order.

Product SpecificationsView full specificationsHide specifications CollapsedExpanded

Chassis and powertrain

ParameterValueUnit
Chassis brandDongfeng
Drive layout4×2
Fuel typeDiesel
Wheelbase3800 mm

Dimensions and weight

ParameterValueUnit
Length6950mm
Height2900mm
Gross vehicle weight11950kg

Tank or body

ParameterValueUnit
Tank or body capacity9.9m³

Performance and configuration

ParameterValueUnit
Maximum speed80km/h